Therma™ i-Warm Blood & Fluid
Therma™ i-Warm Blood & Fluid
The Therma™ i-Warm Blood and Fluid Warmer is engineered to deliver warm blood or IV fluids at the point of infusion, helping reduce the risk of hypothermia during surgery, trauma care or critical care procedures. Its compact design, simple interface and no consumable requirement make it a practical choice for hospitals and emergency settings.
| No. | Item | Specification |
|---|---|---|
| 1 | Equipment Use | Used for immediate heating of liquids in transfusion/infusion; reduces temperature difference between patient and fluid to prevent hypothermia. |
| 2 | Design | Mainly composed of control unit and heating silicone tube. |
| 3 | Temperature Chose | 32°C–43°C, with 0.1°C steps |
| 4 | Liquid Outlet Temp Deviation | ±2.0°C |
| 5 | Display | * Current temp; * Running time; * Status; * Alarm tone pause |
| 6 | Noise | No |
| 7 | Equipment Safety Performance |
With visual and auditory alarm function; High temp alarm(If the current temperature is ≥45 and continues for 15 seconds, the device will sound an alarm and stop working immediately); Over temp alarm(Thermal circuit breaker 47℃±1℃); Low temp alarm( After 5 minutes of startup and operation, if the temperature of the heating tube is ≤30°C, the equipment will issue an alarm and stop working immediately); Fault alarm prompt(The working status window of the display screen displays the fault code and fault information.) |
| 8 | Power | 100–240VAC, 50Hz, 10A |
| 9 | Power Cord | 5 meters |
| 10 | Display Size | 2.4 inches |
| 11 | Weight | <1 kg |
| 12 | Size | Length = 20 cm, Diameter = 7 cm |
| 13 | Whole Set Includes |
Medical Fluid Warmer ×1 Heating Silicone Tube ×1 Detachable Power Cord ×1 Power Adapter ×1 User Manual ×1 Warranty Card ×1 |
| 14 | Heating Silicone Tube Sizes |
600 mm 900 mm 1000 mm 1200 mm (standard) 1400 mm 1600 mm |
| 15 | Certification | ISO 13485, CDSCO MD5 |